Shot blasting is to eject the shot material (steel shot or sand) at a high speed and a certain angle onto the working surface by a mechanical method, so that the shot material impacts the working surface to achieve the roughened surface and remove the residue At the same time, the negative pressure generated by the dust collector will recover the pellets and the cleaned impurity dust etc. After the airflow cleaning, the intact pellets will be automatically recycled, and the impurities and dust will also fall into the dust collection box .
The main components are components (Qingdao Fangheng Motor, soft starter, frequency converter, imported high-speed bearings); the relevant parts of the shot blasting room are made of imported wear-resistant materials to ensure that the service life of the shot blasting room is equivalent to the imported products; Orientable sleeves and other wearing parts are precision cast with wear-resistant materials, and the life is close to imported parts.
1. The surface floating slurry and sand layer can be removed cleanly and thoroughly;
2. It can completely open the capillary holes on the surface of the concrete; make the sealing agent or binder completely penetrate the concrete;
3. Concrete defects can be exposed in advance;
4. Obtain a rough, uniform and clean surface with good anti-slip capability, greatly increasing the shear strength and bonding strength between the layers.
15-25 m2 取决于钢板锈蚀度
400 V/50 Hz CEE插座
1000 mm300mm*1100 mm
Company Name: Qingdao Xinhua Shengtai Equipment Manufacturing Co., Ltd.
Contact mobile phone: 13405322555
Address: Yinzhu Street Office, Huangdao District, Qingdao