Language: ChineselineEnglish
logo

Road shot blasting

  • Vertical shot blasting machine for outer wall of oil storage tank
Vertical shot blasting machine for outer wall of oil storage tank

Vertical shot blasting machine for outer wall of oil storage tank


1-1ZZ51J4330-L.jpg

Equipment introduction:


The vertical shot blasting machine for the outer wall of the oil storage tank is mainly suitable for the cleaning and maintenance of the oil tank, the hull cleaning, and the inner and outer wall cleaning of the large oil tank and spherical objects. The horizontal mode shot blasting machine is mainly suitable for paint removal, specific cleaning of ship decks, restoration of anti-slip performance of road surfaces and bridges, cleaning of asphalt flooding, cleaning and removal of marking lines, degumming and removal of airport roads and concrete dust-free Maintenance etc.


Whether it is a vertical or horizontal cleaning mode shot blasting machine, it can be quickly removed and installed within 20 minutes.


The lifting system of the vertical shot blasting machine on the outer wall of the oil storage tank is installed on the electric fixture and placed on top of the object being cleaned. The operator controls the machine and the elevator through the wireless remote control, so that the shot blasting machine can move up, down, left and right conveniently. And the automatic circulation of abrasive can be implemented, and the material can be added without stopping the machine. And only one person can control production, which is very convenient. It reduces labor and improves production efficiency.


 


Features:

 1. The oil tank shot blasting machine is environmentally friendly and non-polluting. The waste materials and pollutants generated in the oil tank blasting machine are fully recovered by the industrial-grade environmental protection collected by the equipment.


 2. The steel shot can be automatically recovered and separated to achieve recycling; the construction efficiency is very high, and different treatment speeds and strengths can be selected to meet the actual derusting needs of users;


 3. Direct cleaning without harming the steel matrix;


 4. The air volume of the separator is too large. Adjust the air baffle properly until the dust removal effect can be ensured, but it is better not to suck out the projectile. Various road paving in the city can be cleaned with a shot blasting machine


 5. The rust removal effect is good, the surface cleanliness can reach SA2.5 ~ SA3, and at the same time, a certain depth of anchor pattern is formed on the surface to improve the adhesion of the coating.



working principle:


The vertical shot blasting machine on the outer wall of the oil storage tank uses a high-speed turbine to throw the carrier (steel shot) in an instant; hit the surface of the object and bounce back into the hopper. The machine needs to hang a steel wire rope above the body for its work movement. Needed; In addition, the machine itself has four powerful magnets, which are adsorbed on the surface of the steel structure object to ensure the tightness of its work. The four magnets are wrapped under the support points of four magnets for the machine to move up and down Exercise freely.