Language: ChineselineEnglish
logo

Crawler shot blasting

  • Q326 crawler type shot blasting machine
Q326 crawler type shot blasting machine

Q326 crawler type shot blasting machine

Product introduction:


    Q32 series track type shot blasting machines are widely used for surface cleaning of small and medium size batches of workpieces, with excellent performance and reliable quality. Because of its rapid, efficient and thorough cleaning, it is an ideal equipment for cleaning the surface residual molding sand of various batches of medium and small castings, and for cleaning the scale on the surface of forgings and heat-treated parts.


working principle:

The Q32 series shot blasting machine is loaded with high-strength wear-resistant rubber crawler or manganese steel crawler, and throws the high-speed projectile towards the workpiece that is turned on the crawler through the shot blaster to achieve the purpose of cleaning.


    Features:

    1. Q32 series crawler type shot blasting machine produced by Qingdao Xinhua Shengtai Shot Blasting Machinery Co., Ltd .: using the high-speed projecting cantilever centrifugal shot blasting technology of German LUOSIl company, which can significantly improve the cleaning efficiency and obtain satisfactory cleaning The quality is characterized by long service life, simple structure and low failure rate.

    2. The layout of the shot blasting machine body and shot blasting device are determined after the computer three-dimensional dynamic projection simulation, so that the coverage area of the projectile flow accurately covers the surface of the workpiece, and the projectile is simultaneously thrown toward the workpiece from all directions of the workpiece s surface.

    Third, the use of wear-resistant clamp steel rubber track reduces the collision and damage to the workpiece and reduces the noise of the machine.

    Fourth, the use of air separation separator, has a good separation effect and higher productivity, reducing wear on wear-resistant parts (such as shot blaster blades).

    Fifth, the bag-type dust collector is adopted, and the dust emission concentration is lower than the standard prescribed by the state, which improves the working environment of the workers.

    6. After the workpiece is cleaned, the track can be reversed to realize automatic unloading.

    7. The popular pitless form is adopted to save the construction cost of the pit foundation.


technical parameter:

     

                    Q32系列抛丸清理机技术参数

                              

                          型式
项目

                    Q326C

                 

                    QR3210

                    抛丸机生产率

                    T/h

                    0.6-1.2

                 

                    1.5-2.5

                    加料量

                    kg

                    200

                 

                    600

                    单件最大重量

                    kg

                    10

                 

                    30

                    端盘直径

                    mm

                    ¢650

                 

                    ¢1000

                    有效容积

                    m

                    0.15

                 

                    0.3

                    抛丸量

                    kg/min

                    100

                 

                    250

                    除尘风量

                    m3/h

                    2200

                 

                    5000

                    功率消耗

                    kw

                    12.6

                 

                    24.3

                    外形尺寸

                    mm

                3681×1650×5800                                 3972×2600×4768